Tenlog TL-D3 Pro 3D Printer, Dual Independent Extruder, Duplicate and Mirror Mode, Print in 2-Colors


My son has been 3D printing now for the past 2-years and recently decided to get a Dual Extruder 3D printer so he can print in 2 different colors for hos key chain business. We tried 2 other printers before we settled on the Tenlog TL-D3 printer. If you are interested in some of the 3D prints that you see in this video you can purchase them on my son Caleb’s ETSY storefront.

Buy Pool Industry 3D Key Chains:
https://www.etsy.com/shop/3DPoolPrints?ref=search_shop_redirect

Currently, he has these key chains available:
Riptide, PoolRX, Bottom Feeder, Primate Pole, Spin Touch, ColorQ, HASA Chlorine, HASA Acid, MX8, CuLator, Multi-Tork.

You can see all of his prints here:
https://www.swimmingpoollearning.com/3d-printed-pool-company-logos

Note: I purchased this printer on Amazon when they had a coupon with $90 off so it was under $600 which is a real bargain! Unlike others, I was not given a free printer from Tenlog. This is a real review.

I am learning about 3D printers and my son knows quite a bit about them since he has purchased 3 other printers and now this is his 4th printer. He started by buying the Ender 3 and then used the money from the prints he sold to buy the FlashForge Finder and then from that he purchased the AnyCubic Chiron and then the latest was the Tenlog TL-D3.

Here is some more about the TL-D3:
Tenlog TL-D3 Pro 3D Printer, Independent Dual Extruder 3D Printer with 4.3” Touch Color Screen,Silent Mainboards TMC2208 Drive Support PVA TPU ABS PLA,Direct Feed FDM 3D Printer 11.8”x11.8”x13.8”. To order or to check it out:

https://www.amazon.com/dp/B08CSHPFZN/ref=as_sl_pc_qf_sp_asin_til?tag=swimmingpooll-20&linkCode=w00&linkId=2ac0e0d001788185be9e31178e837e03&creativeASIN=B08CSHPFZN

INDEPENDENT DUAL EXTRUDER DESIGN: The TL-D3 Pro dual extruder 3D printer has dual nozzles independent of each other, so you can print in dual material/duplication/mirror mode. With dual-material printing mode, you can get two-color models. Choose duplication or mirror mode, you can get two models of the same color or different colors.

SUPPORT MULTIPLE FILAMENTS: The Tenlog TL-3 Pro 3D Printer is suitable for various filaments like 1.75mm PLA, TPU, PVA, HIPS ABS, wood, etc. You can choose a filament that suits your needs according to the filament you need to print the perfect model.

4.3” TOUCH COLOR SCREEN: Tenlog TL-3 Pro 4.3”’s Touch Screen is easy to operate with its brand new friendly UI. Preview the model and printing process on screen, allowing offline printing. Say goodbye to the traditional manual knob screen.

EASY TO ASSEMBLE: It comes with several assembled parts. You can assemble the 3D printer in 3 steps, with its user manual, in about 5 minutes.

WARRANTY AND SERVICE: We provide a 1-year warranty for the 3D printer and a 3-month warranty for the extruder. With lifetime technical support as well. If you have any questions about the product, you can send an email to amazon@tenlog3d.com and we will reply within 24 hours!

Dual Material Printing
You can use two colored filaments to print on the model to obtain two-color models or use two different filaments to print soluble supports (such as PVA) to accurately achieve difficult-to-place models.

Duplication Mode Printing
You can print two identical models of filaments (or the same or different filaments) of the same color or different colors on the Tenlog 3D printer at the same time, thereby doubling the printing efficiency and saving you time!

Mirror Mode Printing
You can print two symmetrical models of filaments (or the same or different filaments) of the same color or different colors on the Tenlog 3D printer at the same time, the two nozzles are dual-driven at all times for printing, and the two models are immediately aligned with the mirror.

Resume Printing Function
In the event of an unexpected power outage or surge, the control board will remember the last recorded position of the extruder. After the power is restored, The 3D printer will resume printing from the last recorded position.

Filament Runout Detection
When the filament runout detection detects that the filament such as PLA or ABS are used up or broken, the 3D printer will save the information and suspend printing, waiting for the 3D printer to feed the filament again to continue printing.

Unique near-end and direct-drive design
Tenlog 3D Printer uses a direct drive extruder and a powerful near-end silent motor design so that it can print various filaments, such as TPU, PVA, PLA, ABS, HIPS, WOOD, PETG, flexible.

DC-10 Tanker Model before modifications:
https://www.thingiverse.com/thing:2764235

#Tenlog, #Dualcolor3d, #TenlogTLD3, #3Dprinter

What You Need To Know About Hot Tub Covers

If you have a hot tub, it’s imperative that you install a hot tub cover. This is a unit made from high-quality plastic vinyl. The cover serves many roles including: protecting the unit from insects, dirt, heat, and children from getting in. Unlike other units, hot tubs don’t have chlorine. This means that they get dirtier quicker and more frequently than the other units.

Why Pool Cleaning Must Be Done By Experts

Make pools appealing and safe for the whole family by opting for the services of pool companies. Because of this, you are rest assured that you can gain the best benefits of owning a pool in your property.

4 Tips To Consider When Buying A Hot Tub

A hot bath tub provides you with a good place to enjoy your bath. For you to get the most from it, you need to buy the right one. This calls for you to consider some tips when making the purchase. The tips you should consider include:

Does Clear Mean Balanced?

If a pool’s water looks clear does that mean it’s OK to swim in? Is that water balanced and healthy or does it just look that way?

Why You Need Weekly Pool Maintenance

If you have a pool you know you need to keep it maintained. Do you need weekly pool maintenance from the experts?

You May Also Like