How to Lower the pH in Your Pool with Dry Acid (Sodium Bisulfate) the Easy & Safe Way!

Dry acid is one pool chemical not talked about much. I think mainly because the use of muriatic acid to lower the pH in a pool is so widely entrenched in the minds of pool pros and homeowners that Dry Acid is often overlooked. It is also a bit more expensive to use over muriatic acid, although as the price for muriatic acid continues to rise dry acid is becoming more and more popular because of the safety and storage benefits.

You will see dry acid sold as pH Reducer, pH down or of course labeled as Dry Acid. Just look for the active ingredient sodium bisulfate on the label.

Safer to Use:
Sodium Bisulfate (Dry Acid)
Sodium Bisulfate is a dry, granular form of acid. This makes it safer for handling, and it is far less corrosive in a pump room or other space as it is not a strong oxidizer like muriatic acid. It Sodium bisulfate needs to be stored in a dry place, without moisture getting into the container. Sodium bisulfate must be pre-dissolved before being added to the pool, just like any other dry chemical. But if you spill it or get any of it on the pool deck it won’t burn your skin or stain your deck.

Does not burn your skin
Longer shelf life
Easy to store
No toxic fumes
It won’t rust everything around your house or equipment room
Strong as muriatic acid with proper dosage
Easy to use

Adjusting the pH in your pool is critical for proper water balance and to make sure that the water in your pool is not scale forming nor is it being corrosive. The pH is one important element in this. Note also that when you adjust the pH you are also adjusting the Alkalinity. And that the higher the Alkalinity is over the baseline of 80-120 ppm the more dry acid you will need to lower the pH. This is because Alkalinity is a buffer in the water and will slow down the effect of any acid you add if the water is very alkaline.

Dry acid is a bit more expensive than muriatic acid if you are comparing pound for pound which is a bit more difficult because one is in a dry form and the other in a liquid form. But if you measure the dosage of the dry acid correctly it is just as strong as 31.45% muriatic acid. I think for the safety and storage benefits dry acid is hands-down better for homeowner use as well as some service pro use. I like to carry 50 lbs. bucket in the back of my truck and find it very handy as it gives me more space to carry my other chemicals and equipment. It is also good for adding acid to those service accounts were pets are present or the homeowner is next to the pool. The last thing you want to do is pour in a quart of muriatic acid and have them overcome by fumes.

It is best to pre-dissolve the dry acid in a bucket and then once it is dissolved to pour it around the perimeter of the deep end with the pool on and running for at least 3 hours minimum. You can toss it directly in but it is not advised and it only takes 3-5 minutes to dissolve it in a bucket. You will also need a scale to weigh the product to get the exact dosage and I recommend using an online app to get the right dosage amount. Remember that Alkalinity is a factor so if it is above 120 ppm you will need more of the dry acid to move the pH down.

A good online tool is the

There are many very good reasons to switch to dry acid and of course, the fact that it is safer to use is a big one.

Visit my Website:
YouTube Video Index: – A list of all of my videos.
Join me on Patreon:
Podcast Website:
Coaching Site:
Shop at Leslie’s: Leslie’s Pool Supplies has been do-it-yourselfers and pool trade professionals trusted partner since 1963, providing quality products and services to make pool care easy and solutions and expertise to do it right.

#dryacidpool #loweringpoolph #safeacidswimmingpool #swimmingpoolacid

Essential Things To Consider When Using Tubular Balustrades

Whether you are redesigning your home or office, safety standards should be a high priority. That is why you should have tubular balustrades installed to ensure that you meet building regulations. Apart from making your building safe, the fixtures can make your home look more aesthetically pleasing. Here are some major things you should know about using these fixtures.

How To Identify A Great Concrete Pool Builder

Investing in a swimming area in your homestead will revolutionize both your lifestyle and home by making it a great place to live. Having it constructed well will go a long way in adding class and value to your home and this can only be possible if you get the services from a great concrete pool builder. There are so many builders available out there and it is therefore important to learn the tips on how to identify the most suitable to work on your swimming area.

Ways to Choose Pool Tiles From a Wide Array of Online Selections

Thinking of a new pool? There is so much that goes into designing a pool. Whether its color, design, quality and even availability. Ever thought about using glass mosaic tiles? Here are 6 tips to consider when designing a pool with glass tile.

How To Choose The Right Pool Cleaner For Your Backyard Pool?

If you have just installed a new swimming pool in the backyard of your house, then there is one more thing that you have to buy, i.e., a pool cleaner. The reason for buying a pool cleaner is to keep the swimming pool in a good working condition for a long-long time. A swimming pool cleaner can cost you anywhere from $500-$1500.

Reasons To Own Above Ground Pools

The trend towards more affordable and simple to maintain entertainment features provides home owners with a wide range of choices in the selection of a swimming pool. Above ground pools have received increased attention for its versatile applications and cost effectiveness without losing on design and functionality. Learning about the reasons to own such a pool can assist in making the best possible purchase decision.

You May Also Like